Timken ROLLON SC 100, Use And Maintenance

Page: 16 / 18

UM-14
Warnings and legal notes
Transport
Handling and lifting
Check axis integrity after shipment
■
Transport, also based on the final destination, can be done with
different vehicles.
■
Perform transport with suitable devices that have adequate
loading capacity.
■
Ensure that the machine and its components are adequately
anchored to the vehicle.
■
Correctly connect the lifting devices to the established points
on the packages and/or on the dismantled parts.
■
Before handling, read the instructions, especially safety
instructions, provided in the installation manual, on the packa-
ges and/or on the dismantled parts.
■
DO NOT attempt, in any way, to bypass handling methods and
the established lifting, moving and handling points of each
package and/or dismantled part.
■
Slowly lift the package to the minimum necessary height and
move it with the utmost caution to avoid dangerous oscilla-
tions.
■
DO NOT perform handling with an inadequate visual field and
when there are obstacles along the route to reach the final
location.
■
DO NOT allow people to either transit or linger within the range
of action when lifting and handling loads.
■
Do not stack packages to avoid damaging them, and reduce
the risk of sudden and dangerous movements.
■
In case of prolonged storage, regularly ensure that there are no
variations in the storage conditions of the packages.
Every shipment is accompanied by a document (“Packing list”
with the list and description of the axes.
■
Upon receipt check that the material received corresponds to
specifications in the delivery note.
■
Check that packaging is perfectly intact and, for shipments
without packaging, check that each axis is intact.
■
In case of damages or missing parts, contact the manufacturer
to define the relevant procedures.