Timken ROLLON SC 100, Use And Maintenance

Page: 12 / 18

UM-10
SC
Components
Fig. 32
ELM SP Linear unit
1 Anodised aluminium extrusion
2 Driving head
3 Driving pulley
4 Idle pulley
5 Rails
6 Driving belt
7 Lower belt clamp
8 Grease nipple
9 Belt tensioning device
10 Carriage
11 Sliding block
RIGHT POSITION OF THE ELEMENTS
In the image below are
reported the correct angle
positions of the components
that build the shrink ring to
use only in the case it was
dismounted completely.
Fig. 31
IT IS NOT
RECOMMENDED
TO ASSEMBLE THE
RINGS WITH THE
CUTS ALIGNED
IT IS FORBIDDEN
TO ASSEMBLE THE
RINGS WITH THE
THREADS ALIGNED
9
6
3
2
4
7
1
10
8
11
5