Timewave DSP-599zx, Operating Manual

Page: 16 / 106

1 – Introduction
1-6 March 6, 1997
Pressing
[Shift+Chan]
toggles between channels
A
and
B
. The DSP-599zx
audio gain control simultaneously controls volume level of both channels.
Setup mode allows adjustment of the relative volume of the
A
channel with
respect to the
B
channel.
Setup mode also allows you to configure the two output channels indepen-
dently. It is possible to configure the Line Out for each channel differently
from the external speaker and headphone outputs. This can be very conve-
nient when working in one of the Data modes. The Line Out can then be con-
nected to a multi-mode controller.
The DSP-599zx requires external speakers and/or headphones to hear the
audio signal. The DSP-599zx will accept either stereo or mono headphones
with a 1/4” plug. Stereo headphones are preferred over monaural head-
phones so that you monitor both output channels simultaneously.
Visible Memories
The DSP-599zx has six memories to store complete settings and con-figura-
tions. Pressing
[Shift+Store+{#}] (# = 1 - 6) stores every setting and setup
configuration except the audio gain control position. Pressing [Rcl+ {#}] in-
stantly recalls the complete configuration stored in the chosen memory. The
memory number is displayed along with the critical information on the LCD
and LEDs.
Automatic Gain Control
The DSP-599zx has switch-selectable automatic gain control to optimize the
signal levels for best filter performance and to enhance listening by mini-
mizing audible signal level variation.
Function
6
Shift
5
AGC
3
Bypass
Setup Test Data
DSP-599zx
CW Voice
Mode
Rcl/ Store
Spkr/ Chan
1
Random
4
Tone
2
599-032
High Pass
Center Freq
Time
Function
6
Shift
5
AGC
3
Bypass
Data
DSP-599zx
CW Voice
Mode
1
Random
4
Tone
2
599-016
Setup Test
Rcl/ Store
Spkr/ Chan
High Pass
Center Freq
Time