Timewave DSP-599zx, Operating Manual

Page: 42 / 106

2 – Installation
2-16 March 6, 1997
Reset Memory
When you select reset memory, you get the choice of USA or European. Se-
lecting USA sets AM Line Noise to 60 Hz. and sets RTTY frequency tones
to 2210 Hz. Selecting European sets AM Line Noise to 50 Hz. and sets
RTTY frequency tones to 1360 Hz. These also are all individually adjustable
in other sections of setup.
The big thing that Reset Memory does is resets all operation based memo-
ries. Examples include all user memories, power up mode configuration, and
all modifications to Data mode parameters.
1. Press [Shift+Mode] twice to enter Setup mode.
2. Rotate left knob until ,QVWDOO appears on the bottom line of the dis-
play
3. Press the left knob to select.
4. Rotate left knob until 5HVHW 0HPRU\ appears on the bottom left of
the display
5. Press the left knob to select.
6. Rotate left knob until the chosen value appears on the bottom right of
the display. Your choices are USA or EUR.
7. Press the left knob to accept choice and save. Press middle knob to
escape without saving changes.
8. Rotate left knob until your next function to change appears on the bot-
tom line of the display or press the middle knob to return to main set-
up menu.
Exit Setup
When you are through with Setup, press
[Mode]
to return to Voice mode.
Function
6
Shift
5
AGC
3
Bypass
Data
DSP-599zx
CW Voice
Mode
1
Random
4
Tone
2
599-076
Setup Test
Rcl/ Store
Spkr/ Chan
High Pass
Center Freq
Time