DSP-8100c Audio Noise Reduction Filter
March 6, 1979
Quick Start-iii
Quick Start
“I don’t want to read the whole manual just to turn it on.”
You have purchased the most advanced digital signal processor available.
Please complete and return the enclosed Warranty Registration Card. Time-
wave Technology Inc. occasionally offers performance enhancing updates
to its products. By returning the completed Registration Card, we will notify
you about these updates. For current information and hints and tips about our
products check out our World Wide Web site.
If you are in a hurry to use your new equipment, read this Quick Start sec-
tion. It provides enough information to get your new equipment up and run-
ning. You still will want to read through the rest of this manual. It provides
valuable operation tips and information that will allow you to use the fea-
tures to full measure.
What is packed with your DSP-599zx
•
DSP-599zx
•
Operator Manual (what you are now reading)
•
Warranty Registration Card
•
5.5 x 2.1 mm power connector
What is not packed with your DSP-599zx that you will need
•
12-16 Volt dc power supply capable of providing a minimum of 1 am-
pere. Most commercial power supplies produce 13.8 Vdc and are rated
as 12 Vdc. Please see page 2-2 for more information.
•
Two-conductor cable to connect between power supply and DSP-599zx
•
Cables to connect DSP-599zx with your transceiver speaker output,
PTT output, external speaker and multimode controller. All of these ca-
bles will need a RCA type connector on the end that attaches to the DSP-
599zx. The other connector will vary with the equipment on the other
end. Consult your owner’s manuals.
•
External speaker and/or headphones. You will need at least one of these
devices to connect to the DSP-599zx to hear the audio signal. The DSP-
599zx will accept either stereo or mono headphones with a 1/4” plug.
Stereo headphones are the preferred choice because of the dual out-
put channels. External speakers are connected to the unit with RCA
phono plugs. You may need an adapter to convert an existing speaker to
this type of connector.
•
In some data modes you will need a cable from the 8-pin DIN connector
to your transceiver. You may also need a 9-pin serial cable to connect to
your computer.
March 6, 1979
Summary of Contents for DSP-599zx
