Timberwolf TW PTO/S426, Instruction Manual

Page: 5 / 49

TW PTO S426
2 / 45
24.06.2019
TIMBERWOLF TW PTO S426 SPECIFICATION
Power source Tractor PTO drive
Overall weight 1260kg
(without prop shaft)
Type of feed Hydraulic
Feed roller opening 426mm (17”) x 230mm (9")
Material processing capacity 3 tonnes/hr
Required engine power 80 ‐ 115hp
PTO speed 1000rpm
DIMENSIONS
Serial No. Location
The serial number can be found on
the identification plate located on
the gear box guard
Towing Length: 2795mm,
Working Length with standard tow head: 2205mm
1355mm
2420mm, (1600mm with
dischar
g
e
r
emov
ed)
THE TIMBERWOLF TW PTO S426
The Timberwolf PTO S426 is a high speed, heavy duty professional shredder. It is designed to shred general green waste
(brash, prunings, hedge trimmings, Leylandii, Christmas trees, rootballs, etc.),brushwood up to 100mm (4”), pallets,
domestic doors, wooden and plastic window frames (all pre-cut to fit feed aperture), contaminated timber, chipboard,
MDF, packaging materials, uPVC plastic, cardboard, wooden furniture, fence posts and similar items. The machine will
tolerate drinks cans, plastic bottles, stones, rocks and concrete (up to fist size), nails, metal door furniture, glass bottles
and similar items.
To properly control the speed of material entering the shredder chamber, the machine relies on the large feed roller to
grip the material. The feed roller can grip material down to 15mm in diameter. The machine will not tolerate or process
items such as tyres, mattresses, heavy duty plastic containers (used for oils, chemicals, etc.), carpets, reinforced
concrete, metallic items exceeding lightweight domestic door furniture, commercial plastic gas pipe, alkathene water
pipe, metal reinforced drainage/irrigation pipe, baler twine, rope, metal banding, computer hard drives (which contain
magnets) and any similar objects to the above.
NOTE: When materials are corrosive they may attack and degrade the individual components. It is essential that the
unit be thoroughly cleaned down after shredding anything that may contain materials of an aggressive nature.
Ejection of material – Warning! The PTO S426 shredder ejects material at high speed. Ensure there is an adequate
safety zone and that ejected material is aimed away from operators into a safe area, i.e. an enclosure or container with
a back stop (i.e. wall) behind it to prevent ejected material from leaving the work area and causing injury and damage.
If loading into a truck or trailer, ensure the structure is strong enough to cope with the impact from ejected material.
WARNING
LIMITATIONS ON MATERIALS