Timberwolf TW PTO/S426, Instruction Manual

Page: 18 / 49

15 / 45
SAFE WORKING
TW PTO S426
24.06.2019
CHANGE HYDRAULIC OIL AND FILTER
SAFE LIFTING OF THE SHREDDER
2
1
2
1
3
1500mm
1200mm
Use slings rated at 2000kg each for the lifting procedure.
Feed a sling through each lifting point in the roller box marked
with 1000kg (1&2). The length of each rigged sling should be
approximately 1200mm.
Use the top PTO link as the third lifting point (3). The length of
this rigged sling should be approximately 1500mm.
Ensure area is clear of bystanders when lifting and do not
walk/crawl under shredder when raised from floor.
1200mm
Remove the black screw cap from the top of the filter housing. •
Partially remove filter element from inner cup. Leave filter to •
drain for 15 minutes.
Remove filter element from cup when clear of hydraulic oil. •
Remove drain plug and drain oil into a suitable container. •
Replace drain plug. •
Refill with VG 32 hydraulic oil until the level is between the min •
and max lines marked on the tank (about 15 litres).
Refit the filter cup, install a new filter element and refit the •
black screw cap to the filter housing, ensuring o-ring remains in
place.
WARNING
USE PLASTIC GLOVES TO KEEP OIL OFF SKIN AND DISPOSE OF THE USED OIL AND
FILTER IN AN ECOLOGICALLY SOUND WAY. THE OIL AND FILTER SHOULD BE CHANGED
ONCE A YEAR OR AT ANY TIME IT BECOMES CONTAMINATED. BEFORE STARTING
CHECK THAT THE SHREDDER IS STANDING LEVEL.