Timberwolf TW 280PHB (Petrol), Instruction Manual

Page: 40 / 62

6.2 Routine Servicing
Before carrying out any servicing, always ensure the chipper is in a safe condition.
(Refer to Section 6.1 "
Safe Maintenance" on page 37.)
To ensure that your TW 280PHB is always maintained in good working order, checks
should be carried out at the specified intervals.
Daily servicing is detailed within this manual. (Refer to Section 6.2.1 " Daily Servicing" on
page 38.)
A series of checks to be carried out at more extended intervals are detailed within the
'Service and Warranty' document.
6.2.1 Daily Servicing
The following checks should be carried out every day:
• Check coolant level.
• Check radiator is clear.
• Check hydraulic oil level - top up if necessary. (Refer to Section 5.15 " Check Hydraulic
Oil Level" on page 34.)
• Check engine oil - top up if necessary.
• Check for engine oil / hydraulic leaks. (Refer to Section 6.13 " Check Hoses" on page
48.)
• Check fuel level. (Refer to Section 5.16 " Check Fuel Level and Refuel" on page 34.)
• Check feed funnel, feed roller cover, access covers, engine covers and discharge unit
are securely fitted.
• Check blades and change if necessary. (Refer to Section 5.14 " Blade Wear" on page
33 and Section 6.8 "
Change Blades" on page 43.)
• Clean air filter element (Depending on working environment).
• Check tyre pressure is 3.4 bar (50 psi).
• Check safety bar mechanism.
• Check for tightness: all nuts, bolts and fastening. Ensure nothing has worked loose.
(Refer to Section 6.7 " Check and Replace Fasteners" on page 42.)
• Grease the roller box slides. (Refer to Section 6.15 " Grease the Roller Box Slides" on
page 49.)
• Grease the roller splines and bearings. (Refer to Section 6.16 " Grease the Roller
Splines and Rotor Bearings" on page 50.)
6.3 Spares
Only fit genuine Timberwolf replacement parts, such as blades, screws and tanks etc.
Failure to do so may result in the invalidation of the warranty and may result in damage to
the TW 280PHB, personal injury or even loss of life.
38/60 C190-0307 - Rev 1.0 EN
TW 280PHB (Petrol) 6 Maintenance Instructions