Timberwolf TW 280PHB (Petrol), Instruction Manual

Page: 8 / 62

1.3 Warning or Caution Symbols
Be aware of these symbols and where shown, carefully follow the instructions.
These symbols indicate important safety messages in this manual. When you see these
symbols, be alert to the possibility of injury to yourself or others and carefully read the
message that follows.
Always follow safe operating and maintenance practices.
1.4 Hazardous Materials
The following hazardous materials are present within the TW 280PHB:
• Engine oil • Battery acid • Petrol
• Grease • Hydraulic oil • Copper Ease
• Loctite • Coolant
MATERIAL SAFETY DATA SHEETS FOR THESE HAZARDOUS MATERIALS ARE
AVAILABLE ON REQUEST. REFER TO THESE FOR FIRST AID AND FIRE
PROTECTION MEASURES.
Always follow recommended procedures for safe handling, removal and disposal of
hazardous materials. Safety precautions should be taken when handling hazardous
materials. The use of oil-resistant gloves and safety glasses is recommended. Avoid direct
contact with the substance. Store in a cool, well ventilated area. Avoid sources of ignition,
strong oxidising agents and strong acids. Ensure hazardous spillages do not flow into the
ground or drainage system. Ensure potential environmental damage is controlled safely,
according to local laws.
1.5 Purpose
The TW 280PHB is designed to chip solid wood material up to 210 mm ( 8 inches) in
diameter and is capable of chipping over 6.5 tonnes of brushwood per hour.
6/60 C190-0307 - Rev 1.0 EN
TW 280PHB (Petrol) 1 Introduction