Timberwolf TW 280PHB (Petrol), Instruction Manual

Page: 22 / 62

YOU MUST NOT smoke when refuelling.
YOU MUST NOT climb on the machine at any time .
YOU MUST NOT use the machine if there is any exposed
wiring.
YOU MUST NOT use the chipper inside buildings or
enclosed spaces.
YOU MUST NOT handle material that is partially
engaged in the machine.
Figure 1 - Feeding Position
YOU MUST NOT let anyone who has not received instruction or training operate the
machine.
YOU MUST NOT allow any of the following to enter the machine as serious damage is
possible:
3.6 Noise Emissions
The TW 280PHB has been tested according to BS EN ISO 3744:2010, as required by
Annex III of Directive 2000/14/EC “Noise Emission in the Environment by Equipment for
Use Outdoors”.
The test was carried out while chipping 200 mm x 200 mm Corsican Pine, 1.5 m in length.
Equivalent Continuous Sound Pressure Level (LAeq) at the operator's position is 98 dB(
A).
Guaranteed Sound Power level (LWA) is 119 dB( A).
Prolonged exposure to loud noise may cause permanent hearing loss.
All persons within a 4-metre radius must wear good quality ear protection (EN 352) at all
times to prevent possible damage to hearing.
20/60 C190-0307 - Rev 1.0 EN
TW 280PHB (Petrol) 3 Safety Notes and Warnings