Timberwolf TW 230VTR, Instruction Manual

Page: 8 / 68

TW 230VTR
6 / 65
SAFE WORKING
C190-0113 01.07.2019 Rev: 4.0
GENERAL SAFETY MATTERS
Do not operate chipper unless available light is •
sufficient to see clearly.
Do not use or attempt to start the chipper without the •
feed funnel, guards and discharge unit securely in
place.
Do not stand directly in front of the feed •
funnel when using the chipper. Stand to
one side.
Do not smoke when refuelling. •
Do not let anyone who has not received •
instruction operate the machine.
Do not climb on the machine at any time. •
Do not handle material that is partially engaged in the •
machine.
Do not touch any exposed wiring while the machine is •
running.
Do not use the chipper inside buildings. •
93.3 dB
95.2 dB
96.3 dB 96.6 dB
R= 4 metres
Guaranteed Sound
Power: 120dB (
A
)
101.5 dB
96.8 dB
As required by Annex III of Directive
2000/14/EC “Noise Emission in the
environment by equipment for use outdoors”.
Tested according to BS EN ISO 3744:2010.
R= 10 metres
9
0
.8
d
B
C
a
lc
u
la
te
d
90
.8d
B C
alc
ula
te
d
90
.8d
B C
al
cu
la
te
d
Noise levels above 80dB (
A
) will be
experienced at the working position.
Prolonged exposure to loud noise may cause
permanent hearing loss. All persons within a
4 metre radius must also wear good quality
ear protection (EN 352) at all times to
prevent possible damage to hearing.
NOISE TEST
Machine: TW 230VTR
Notes: Tested chipping 120mm x 120mm corsican pine 1.5m in length
DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
DAMAGE IS
LIKELY
BRICKS STRING ROOTS BEDDING
PLANTS
STONES METAL GLASS RUBBER
CLOTH PLASTIC