Timberwolf TW 230VTR, Instruction Manual

Page: 17 / 68

TW 230VTR
15 / 65
SERVICE INSTRUCTIONS
C190-0113 01.07.2019 Rev: 4.0
SERVICE SCHEDULE
WARNING
ALWAYS IMMOBILISE THE MACHINE BY STOPPING THE ENGINE, REMOVING THE
IGNITION KEY AND DISCONNECTING THE BATTERY BEFORE UNDERTAKING ANY
MAINTENANCE WORK.
SERVICE SCHEDULE
Daily
Check
50
Hours
100
Hours
500
Hours
1
Year
Check water.
ü
Check radiator is clear.
ü
Check engine oil - top up if necessary (10W-30).
ü
Check for engine oil / hydraulic oil leaks.
ü
Check fuel level.
ü
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
ü
Check blades
ü
Clean air filter element. DEPENDING ON WORKING ENVIRONMENT
Lubricate variable track base slides. WEEKLY, DEPENDING ON WORKING ENVIRONMENT
Check safety bar mechanism.
ü
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
ü
Grease discharge flange.
ü
Check tension of main drive belts (and tension if
necessary).
ü
Grease the roller box slides.
ü
OR AS REQUIRED - SEE PAGE 21
Grease the roller spline and bearing.
ü
OR AS REQUIRED - SEE PAGE 21
Check anvils for wear.
ü
Check fuel pipes and clamp bands.
ü
Check battery electrolyte level.
ü
Check for loose electrical wiring.
ü
Replace hydraulic oil filter - every year or 100 hours
after service or repair work to the hydraulic system.
ü
OR
ü
Replace hydraulic oil.
ü
OR
ü
Replace fuel pipes and clamp bands.
REFER TO YOUR ENGINE SUPPLIERS MANUAL
Check coolant.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn. RETURN TO DEALER FOR ANVIL CHANGE