TiLite AERO Z Owner'S Manual Download

Page: 39 / 113

3-5

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 3: FOOTRESTS

Figure 3-8

Angle Adjustable High Mount Footrest

Allen

Screws

Locknuts

Figure 3-9

Angle Adjustable High Mount Footrest with Extension Tubes

Extension Tubes

Allen Screws

Adjusting the Height/Replacing

The Angle Adjustable High Mount Footrest for the Aero Z wheelchairs can be replaced or the height adjusted by using

the tools and following the procedures under “Titanium Footrest (Aero Z)” on page 3-3.

Flip-Back Footrest

The Flip-Back Footrest can be flipped upward and backward to position the footplate out of the way for purposes of

transferring into and out of the wheelchair. See Figure 3-10.

You can adjust the height of, or replace, the Flip-Back Footrest by using the tools and following the procedures for

adjusting the height of, or replacing a footrest as set forth under “Titanium Footrest (ZRA)” on pages 3-2 and 3-3 or

under “Titanium Footrest (Aero Z)” on page 3-3.

Figure 3-10

Flip-Back Footrest

Adjusting the Angle

Tools needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the two Allen screws that secure the stop clamps to the footrest extension tube. See

Figure 3-11.

2. Adjust the footrest to the desired angle.

3. Tighten the Allen screws. Make sure the screws are secure and will not permit the footplate to rotate downward

under weight.

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands