TiLite AERO Z Owner'S Manual Download

Page: 99 / 113

14-1

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 14: TRANSPoRTATioN oPTioNS

As of this date, the Department of Transportation has not approved any tie-down systems for transportation

of a user while in a wheelchair, in a moving vehicle of any type. It is TiLite’s position that users of

wheelchairs should transfer into appropriate seating in vehicles for transportation and should use the

restraints made available by the auto industry.

TRANSpORTATION OpTIONS

The TiLite Aero Z and the TiLite ZRA are available with a Transit Tie-Down Option or a Wheelchair

Transport Option. The Transit Tie-Down Option, which is only available as a factory-installed option, has

been crash-tested in accordance with ISO 7176-19 as described in this Owner’s Manual. It is approved

for occupied transit use. The Wheelchair Transport Option has NOT been crash-tested in accordance with

either ISO 7176-19 or ANSI/RESNA WC19. It is approved only for transportation of an UNOCCUPIED

wheelchair. To determine whether your TiLite Aero Z or ZRA is equipped with the Transit Tie-Down Option

or the Wheelchair Transport Option, see Figures 14-1 and 14-2.

Figure 14-1

Transit Tie-Down Option Sticker

TiSport, LLC

2701 West Court Street

pasco, WA 99301

Advena Ltd.

33 Bridge Street,

Hereford HR4 9DQ UK

SN:

11902420

WARNING

please refer to the applicable TiLite Owner’s Manual before use.

This wheelchair COMpLIES with ISO 7176-19.

t ^

please refer to the applicable TiLite Owner’s Manual before use.

This wheelchair COMpLIES with ISO 7176-19.

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands