TiLite AERO Z Owner'S Manual Download

Page: 69 / 113

8-3

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 8: AXLE PLATES AND CAMBER PLUGS

(CENTER OF GRAVITY; REAR SEAT HEIGHT)

Figure 8-3

Replacing the Camber Tube

Camber

Tube

Allen

Screw

Bumper

Assembly

Washer

Flats

Camber

Clamp

Adjusting Toe-In/Toe-Out

Tools Needed:

• 3/16” Allen Wrench

• 7/8” Open End Wrench

• Ruler or Tape Measure

Note:

Adjusting toe-in/toe-out does not apply to chairs with 0° camber; however, it is still necessary to make sure that

the camber plug flats are perpendicular to the ground.

1. Make sure the distance from the end of the camber tube to the camber clamp is identical on both sides of the

chair. See Figure 8-4.

2. Make sure the rear wheels are properly inflated.

3. Place the chair on all four wheels with the casters trailing toward the rear of the frame. See Figure 8-5.

Figure 8-4

Adjusting the Toe-In/Toe-Out

Camber

Clamp

Camber

Tube

Measurement A

Figure 8-5

Adjusting the Toe-In/Toe-Out

4. Measure from the floor to the center of the axle (“Measurement A”). Be sure the tape measure/ruler is

perpendicular to the floor.

5. Block the wheels with a heavy object so the chair can not roll forward or backward (do not use the wheel locks as

this may affect the toe-in/toe-out adjustment).

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands