TiLite AERO Z Owner'S Manual Download

Page: 77 / 113

10-3

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 10: WHEEL LOCKS

Figure 10-3

Adjusting/Replacing

Allen

Screws

Wheel Lock

Clamp

Wheel Stop

Frame

Tire

Replacing

Tools Needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the two Allen screws that secure the wheel lock clamp to the frame. See Figure 10-3.

2. Slide the wheel lock out of the clamp.

3. Slide the new wheel lock into the wheel lock clamp, but do not tighten the Allen screws.

4. Follow the procedures under “Compact Scissor Lock - Adjusting” on page 10-2 to position and secure the new

wheel lock.

Uni-Lock

Adjusting

Tools Needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the two Allen screws in the wheel lock clamp. See Figure 10-4.

2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 3/16” into the tire

when engaged in the locked position.

3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame.

Figure 10-4

Adjusting/Replacing

Allen

Screws

Handle

Wheel Stop

Frame

Tire

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands