TiLite AERO Z Owner'S Manual Download

Page: 52 / 113

5-4

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 5: ARMRESTS

Adjusting the Armrest Height

Tools Needed:

• 5/32” Allen Wrench

1. Remove the armrest from the receiver.

2. Remove the Allen screw and washer securing the armrest stop. See Figure 5-7.

3. Reassemble the armrest stop in the desired location on the armrest upright (in 1/2” increments).

4. Securely tighten the Allen screw.
5. Reinstall the armrest in the receiver.

Figure 5-7

Adjusting the Armrest Height

Armrest

Upright

Allen

Screw

Armrest

Stop

Washer

Adjusting the Armrest Angle

Tools Needed:

• 5/32” Allen Wrench

1. To adjust the angle at which the armrest sits when in the down position, loosen, but do not remove, the Allen

screw that secures the stop clamp. See Figure 5-8.

2. Slide the stop clamp forward on the armrest to lower the angle at which the armrest sits in the down position, or

slide the stop clamp rearward on the armrest to raise the angle.

3. Securely tighten the Allen screw to fix the stop clamp in place.

WARNING

Make sure that the stop clamp is securely tightened before applying weight to the armrest.

If you ignore this Warning,

you could fall, tip over or lose control of the wheelchair and seriously injure yourself or others or damage the

wheelchair.

Figure 5-8

Adjusting the Armrest Angle

Stop

Clamp

Allen

Screw

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands