TiLite AERO Z Owner'S Manual Download

Page: 65 / 113

7-7

ZRA_Aero Z Owner’s Manual

OM_ZRA_Aero Z_0913RevA

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

Safety Check

When properly positioned in wheelchair, the wheelchair user should lean forward and side to side to check the fit.

Check for:

1. Normal operation of adjustment straps.

2. Comfort: look for areas of irritation.

3. Position: if too high or too low, adjust anchor points.

4. Interference with other devices: relocate anchor points as necessary.

5. Move chair through full range of motion, including folding, and rolling. Check for any interference.

Maintenance

Check periodically for signs of wear in the stitching and webbing. If significant wear is found, contact your supplier for

qualified repair or replacement by TiLite.

Summary of Contents for AERO Z


















































































































Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands

TiLite AERO Z, Owner'S Manual

Search results

Summary of Contents for AERO Z

Reviews:

Related manuals for AERO Z

Brands by name

Popular brands