Tiger TTA-01, User Manual

Page: 5 / 11

Instruction
No Description Code
8 GROUND GND
9 Current loop+(input) +OUT
10 Current loop-(output) -OUT
11
RS232 sending for remote
display
TXD
▲
Scoreboard output port cable of the indicator must connect with soreboard correctly. Otherwise, it would broke the
output port of the indicator, or broke the scoreboard input port. Also it may break the indicator and scoreboard too .It
shall use the dedicated connection cable.
▲
Scoreboard must connect to ground reliably, otherwise it may influence the indicator normal use, or may broke the
load cell , indicator, scoreboard and printer.
2.5 Connection to serial communication interface
Instruction
No Description Code
5 Connect to ground GND
1
RS485
（
A
）
A
9 RS485
（
B
）
B
3 RS232 receive RXD
2 RS232 send TXD
▲
Connect communication interface and PC side correctly, or will break the indicator interface and PC side interface.
▲If you want to connect
with PC, it shall be done by professional person .If you have the computer technology and
process edit performance, it would be better. Non-professional person can not do this.
▲
The indicator has RS232 serial communication interface, it could connect with computer.
3
）
Display instruction
4
）
Operation instruction
Operation :use key “←”“→” to choose the menu or press number key to choose
menu,press key ‘ENTER’ to go into it.All is English menu and English notice,if you
have basic scale knowledge ,you could operate it easily.
N.W
Stable
Zero
Date
，
format:
“
YY-MM-DD
”
Time
，
format:
“
HH-MM-SS
”
Unit
keyboard identification