![background image](http://html1.mh-extra.com/html/tiger/tigerflex-zora/tigerflex-zora_assembly-instructions-manual_1114938019.webp)
19
Please retain instructions for future reference
Step 12:
WINDOW INSTALLATION
• Offer window up to the opening as shown.
• Make sure window is positioned centrally, resting on the last full log within the opening.
Note: There will be a gap either side to allow for settling.
• Secure the window to the walls using 12x 35mm
(S35)
screws.
• Internal fascia’s can be installed at this point.
(Repeat Stage 11)
S35
S35
S35
S35
S35
Step 13:
DOOR INSTALLATION
• Offer door up to the opening as shown.
• Make sure door is positioned centrally,
resting on the last tanalised bearers on
the floor within the opening.
1)
If door is on side of cabin, rest door on
the half log.
Note: There will be a gap either side to
allow for settling.
• Secure the door to the walls using
12x 35mm
(S35)
screws.
• Internal fascia’s can be installed at this
point.
(Repeat Stage 12)
Note: Doors do not have an internal
lower bottom fascia.
S35
S35
S35
S35
S35