![background image](http://html1.mh-extra.com/html/tiger/tigerflex-zora/tigerflex-zora_assembly-instructions-manual_1114938013.webp)
Please retain instructions for future reference
13
Step 5:
FLOOR ASSEMBLY
• Measure corner to corner diagonally to make sure cabin floor is square. If both values are equal, your frame is
square. Make any adjustments if required until values are equal.
1
1
2
2
Step 6:
FLOOR ASSEMBLY
(MODULE PACKS: H, J & Q)
• From the “Door Board”
(see Stage 3)
work your way across the frame, securing remaining
floorboards using 10x 30mm
(N30)
galvanised nails per floorboard.
Note: you will need to remove the 4 floorboards and logs that were
used to hold the frame together as you come to them.
• Final floorboard may need to be trimmed.
Measure as shown and cut to size.
(Pic D)
D
N30