TIGA e-Park 220, Instruction Manual

Page: 41 / 48

EN - 19
IMPORTANT Ensure that the
battery is fully charged at least once
a month and always before use.
Before starting to use the machine again:
•
prepare the machine as described in
chapter "7. Using the machine" .
11. HANDLING AND TRANSPORTATION
•
When handling the machine, always:
– Deactivate the power take-of;
– Set the cutting means assembly
to the transport position;
– Switch of the machine.
•
When transporting the machine
on a vehicle or trailer, always:
– use an access ramp of suitable
strength, width and length;
– Load the machine, with the key removed
from the ignition, without a driver and
pushed (transmission disengaged)
by an adequate number of people;
– Set the cutting means assembly
to the work position;
– Engage the parking brake;
– Engage the transmission;
– position it so that it does not
cause a hazard to anyone;
– Fasten irmly to the means of transport
using ropes or chains to prevent it from
tipping over causing damage and fuel leaks;
– Always place the attachments on
the ground (if the machine has
mechanical stops for transport).
12. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualiied persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
•
Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
•
Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
•
Genuine spare parts are supplied by
Authorised Assistance Centres and Dealers.
•
It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.
13. WARRANTY COVERAGE
The warranty conditions are intended for
consumers only, i.e. non-professional operators.
The warranty covers all material quality
and manufacturing defects recognised
during the warranty period by your
Dealer or Authorised Service Centre.
The warranty is restricted to the repair or
replacement of components recognised as faulty.
It is advisable to send your machine once a year
to an Authorised Service Centre for servicing,
assistance and safety device inspection.
The warranty only applies to machines
subjected to regular maintenance.
The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover
damages resulting from:
•
Failure to become familiar with the
documentation accompanying the
machine (Owner’s manual).
•
Professional use.
•
Carelessness, negligence.
•
External causes (lightning, impact,
presence of foreign bodies inside
the machine) or incidents.
•
Incorrect use or assembly or
prohibited by the manufacturer.
•
Poor maintenance.
•
Modiication to the machine.
•
Use of non-genuine spare
parts (adaptable parts).
•
Use of attachments not supplied or
approved by the manufacturer.
The warranty does not cover:
•
The routine/occasional maintenance
operations (described in the
instruction manual).
•
Normal wear and tear of consumables
such as cutting means, wheels,
safety bolts and wiring.
•
Normal wear and tear.
•
Deterioration in the appearance
of the machine due to use.