TIGA e-Park 220, Instruction Manual

Page: 29 / 48

EN - 7
4.1.2 Improper use
Any other usage not in keeping with the afore-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of
improper use may include, but are not limited to:
– allowing children, animals or other
passengers to ride on the machine as
they could fall of and injure themselves or
compromise safe driving by the operator;
– towing or pushing loads without the use
of the speciied attachment for towing;
– using the machine for riding over unstable,
slippery, icy, stony, rough, marshy
ground or puddles that do not allow the
consistency of the ground to be assessed;
– using the cutting device on
surfaces other than grass;
IMPORTANT Improper use of the
machine will invalidate the warranty, relieve
the Manufacturer from all liabilities, and the
user will consequently be liable for all and
any damage or injury to himself or others.
4.1.3
Usertypes
This machine is intended for use by
consumers, i.e. non-professional operators.
The machine is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.
4.2 SAFETY SIGNS
The machine has various symbols on it
(Fig.2). They are here to remind the operator
of the necessary attention and caution
to follow when using the machine.
Meaning of symbols:
Warning!
Read the
instructions before use.
Warning! Cutting risk.
Cutting means in operation.
Do not insert hands or feet into
the cutting device housing.
Remove the key and
read the instructions
before carrying out any
maintenance or repair work.
Danger! Risk of
projectedobjects.
Make sure that there no
one is in the work area
during machine use.
Max 10°
Danger! Machine roll-over:
Do not use the machine on
gradients in excess of 10°.
max
xxx N
(xxx kg
max xxx N (xx kg)
When using the towing
kit, do not exceed the load
limits indicated on the label,
and respect the applicable
safety regulations.
WARNING!
Always
wear ear defenders.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.
4.3 IDENTIFICATION LABEL
The identiication label includes
the following data (ig. 1):
1.
Sound power level.
2.
CE conformity marking.
3.
Year of manufacture.
4.
Type of machine.
5.
Serial number.
6.
Name and address of Manufacturer.
7.
Article code.
8.
Max. motor operation speed.
9.
Weight in kg.
10.
Charging power voltage and frequency.
11.
Electrical protection rating.
12.
Rated voltage.
13.
Battery capacity.
Write the identiication data of the
machine in the speciic space on the
label on the back of the cover page.
IMPORTANT
Quote the information on
the product identiication label whenever you
contact an Authorised Service Centre.
IMPORTANT
The example of the
Declaration of Conformity is provided
on the last page of the manual.
4.4 MAIN COMPONENTS
The machine consists of the following
main components (Fig. 1):