manualshive.com logo in svg

Tiara Yachts C49, Owner'S Manual, Page: 3 / 152

Share
Download
Tiara Yachts C49 Owner'S Manual Download Page 3

Welcome to the family of Tiara Yachts boat owners and congratulations on your purchase of 
your new Tiara Yacht.

We understand there are many choices available to you, and we appreciate the investment 

that you’ve made and the subsequent faith and confidence that you’ve placed into our 

product. Hopefully, during the selection and buying process, you discovered that each Tiara 
has been designed, engineered, and built with care and precision.

When our company was started, it was the goal of my father, Leon Slikkers, to provide you 

with the finest quality boat available. We want to be the best and deliver the best to you. And 

part of that includes a delightful ownership experience. Everything we have achieved since our 
humble beginnings has been with this same goal in mind.

The information within this owner’s manual was assembled to assist you in understanding 
how to operate your boat to obtain the maximum enjoyment of your Tiara Yacht. So 
please take time to read the manual completely and please operate your boat safely and 
courteously.

I would also like to ask you a personal favor. Shortly, you will receive a survey asking 
for your opinion about the sales process you experienced when you purchased your 

boat. Approximately nine months later, you’ll be sent another survey inquiring about your 

ownership experience. By taking a few minutes to complete these surveys, you will be 
providing us with valuable information.

Best wishes for many happy hours aboard your new Tiara Yacht,

Thomas B. Slikkers
CEO/President S2 Yachts

Summary of Contents for C49

























































































































































Reviews:

No comments