Owner’s Manual
E
2010 THYSSENKRUPP ELEVATOR
Printed in USA February, 2010
Door Protection-3
Installation
The Model 640 can be installed on center-opening (Fig 2) or
side-opening (Fig 3) doors. The unit is normally configured for
centreopening but using the Quick Fix strike post moulding,
the 640 can be converted in seconds.
The QuickFix mouldings allow fast installation to the elevator
door in any position along the 2050mm long fixing flange.
Software Features
Power Reduction Function
This software feature prolongs the life-span of the detectors
by putting them into a less active state when the lift is not in
use. It automatically activates when the detectors are stopped
very close together for more than 10 seconds. In this mode,
scanning is reduced to once every 2 seconds. If the doors
start to open, or an obstruction is detected, then the normal
scanning and trigger mode is resumed.
Figure 6 -
Center Opening Doors
Side Opening Doors
Summary of Contents for TAC 32
Page 1: ...TK ThyssenKrupp Elevator Americas Business Unit Owner s Manual...
Page 187: ......