Owner’s Manual
E
2010 THYSSENKRUPP ELEVATOR
Printed in USA February, 2010
I2®/I3 Valve-3
Figure 2 - I-2 Valve
Down Stop
Adjustment
Low Pressure
Adjustment
Up Leveling
Adjustment
Up Slowdown
Adjustment
Up Stop
Adjustment
Up Start
Adjustment
Lowering and Leveling
Speed Adjustment
Down Start
Adjustment
Down Slowdown
Adjustment
Up Leveling Speed Adjustment
1. Turn the UP LEVELING adjustment screw OUT (ccw) until
it stops. See Figure 1 and Figure 2.
2. Turn IN (cw) 4 turns.
Adjustment Needles
NOTE:
Do
not
loosen the nuts on the adjustment needle
stems to make adjustments. They should be snug against the
valve body at all times.
1. Turn the UP START, UP STOP, and UP SLOWDOWN ad-
justment needles In (cw) to fully closed position
.
See
Figure 2.
2. Turn the UP START needle OUT (ccw) 9 turns.
3. Turn the UP STOP needle OUT (ccw) 3 turns.
4. The UP SLOWDOWN needle should remain closed at this
time.
Down Section
Lowering and Leveling Speed Adjustment
1. With the car set on the buffers adjust the LOWERING and
LEVELING screw so that
3
/
4
I
(20 mm) extends beyond
the valve body. See Figure 3.
To avoid damage to the piston
face and seat, never turn the
Lowering and Leveling Speed Adjustment unless the car
is resting on the buffers or the car isin motion.
Figure 3 - Lowering and Leveling
Speed Adjustment
3
/4
I
Tank Return Line
(19mm)
Summary of Contents for TAC 32
Page 1: ...TK ThyssenKrupp Elevator Americas Business Unit Owner s Manual...
Page 187: ......