background image

04/03/2015

 

Orion - Gulliver

 

User Manual 

 

 

12

 

 

   

 

3.7

 

Siren 

 

Apart from when the alarm button is pressed (not present in the case of autodialer system) the siren 
sounds in the following cases: 

 

The  platform  is  not  level  with  the  floor  and  one  or  more  doors  are  open  or  unlocked  -> 

continuous sound 

 

he  platform  is  not  level  with  the  floor  and  one  of  the  safety  devices  has  intervened  -> 

intermittent sound 

 

4.  Use 

 
Attention!  In  the  following  cases  the  platform  may  stop  between  two  floors  and  so  may  not  be 

moved from the outside: 

 

Elevated viscosity of the oil that impedes the descent movement; 

 

Loss of power during ascent movement; 

 

"Technical shifts" caused by  a lack of  electrical power supply. What is meant by  the term 

"technical shifts" is all of those movements due to an increase in the volume of oil due to 

heating (ascent) and to oil seepage in the valve (descent). 

 

In such cases the Platform Lift will undergo (could undergo) a levelling at the low floor as described 
below: 

 

After 2 minutes and  30 seconds, the display or the emergency lamp, where no display  is 

present, will begin to flash. 

 

The internal alarm will begin to sound; 

 

Having passed another 30 seconds the levelling at the low floor will come about. 

 

4.1

 

Machines with manual doors  

4.1.1

 

How to call the car to the floors 

 

If the green signal is on, the car is at the floor. 
 

If the red signal is on, the car is in movement. The car may be called ONLY when neither the green 
lamp nor the red lamp is visible.  The call is performed  pushing just once, and without having to 

hold the button down, the button on the floor button panel, the red signal light lights up indicating 
that the machine is in movement.

 

4.1.2

 

How to command the car from inside of the cabin 

 
The commands are active only when all of the doors are closed and none of the safety devices has 

been tripped. 
 

To move toward the destination floor, push the respective button and hold it down.  Any on-board 
command has priority over external commands.  

 
Only after reaching the floor may the button be released, then the door unlocks and it is possible to 

exit the platform.

 

 

 
 

 

Summary of Contents for gulliver

























Reviews: