18
This document is the property of THRILL INTERNATIONAL and may not be reproduced without the company’s prior consent.
3) Connect the charger to the machine by inserting the charger plug into the connection socket
on the appliance (see diagram above);
4) Connect the battery charger plug into the mains supply socket, away from water or moisture;
5) Connect the solenoid valve to the CO2 cylinder as indicated in section 5.2 of this manual;
6) Turn on the appliance by pressing the button positioned on the edge of the upper frame;
7) Being careful not to stand too close to the nozzle, perform a preliminary trial/cleaning cycle.
This is necessary to verify that the appliance is working properly and also helps to eliminate
any residues that might have become trapped in the CO2 circuit during the connection of the
CO2 cylinder, for example, or packaging residues.
All other operations of the machine (cylinder installation and removal, cleaning, search faults,
etc.) are the same as those described for the Vortex F1 Pro version of the appliance. Please refer
to the relevant instructions.
8. CLEANING
To ensure the optimal levels of hygiene the appliance is capable of delivering are maintained,
the machine must be cleaned daily to remove all the liquids residues that can accumulate in the
drip tray.
To clean the product, follow these steps:
1) Close the valve on the CO2 cylinder;
2) Place a glass on the rosette wheel and press down to relieve any residual pressure of CO2;
3) Turn off the machine with the power switch;
4) Wait a few minutes until the nozzle reaches room temperature;
5) Unscrew the nozzle, the rosette wheel, the bush/bearing and ring nut/flange and wash in
hot water with a mild detergent; alternatively these can be washed in the dishwasher.
Mounting bracket
for fixing appliance
to worktop
Jack inserted into
the appliance
connection socket
Mounting kit
Summary of Contents for CUBE
Page 43: ......
