T
Thrane & Thrane
T
TT-3020B C p a ra
Capsat Transceiver
I
t l
o
l
Installation Manual
P g
Page 4
5
30MAY95
The Antenna is shipped in a separate box.
69-102881
1
TT-3001B Antenna Unit
51-200833-003
1
Unbraco Key, Steel N3
For antenna mounting
51-200834-006
1
Unbraco Key, Steel N6
For antenna mounting
1
Self-bonding tape, 30cm
For sealing the antenna
connector
1
Description for fitting self-
bonding tape
403020-941
1
Antenna cable, 5m
Table 1: Packing list.
2.1.3
Storage
The TT-3020B may be stored or shipped in temperatures within the limits -40° C to +80°
C. It is advisable to protect the TT-3020B from extreme temperature variation which can
cause excessive condensation. It is recommended that the TT-3020B is unpacked
immediately on delivery.
2.1.4
Repacking for shipment
The shipping carton for the TT-3020B has been carefully designed to protect the
transceiver and its accessories during shipment. This carton and its associated packing
material should be used if repacking for shipment. Attach a tag indicating the type of
service required, a failure description, return address, model number and full serial
number. Mark the carton FRAGILE to ensure careful handling.
If the original shipping carton is not available, the following general instructions should
be used for repacking with commercially available material.
1. Wrap the TT-3020B in heavy paper or plastic. Attach a tag indicating the type of
service required, return address, model number and full serial number.
2. Use a strong shipping container, e.g. a double walled carton of 160 kg test material.
3. Protect the front- and rear panel with cardboard and insert a 7 cm to 10 cm layer of
shock absorbing material between all surfaces of the equipment and the sides of the
container.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
http://funk-an-bord.de
-- Page 7 of 42 --
Materialien zur LRC Prüfung
