T
Thrane & Thrane
T
TT-3020B C p a ra
Capsat Transceiver
I
t l
o
l
Installation Manual
P g
Page 8
38
5
30MAY95
3.4.1
Entering your mobile type and number
For ease of operation and general information when you operate your Capsat system,
you should consider to enter the mobile number.
Just type in the Inmarsat-C 9 digit number that you have received from your PTT
authorities.
An Inmarsat-C mobile number is always in the range:
400000000 to 499999999
If you type a number outside this range the Transceiver will ignore it.
You should not attempt to use your equipment before you have received a mobile
number, because the Mobile Number means that you have been registred in the
database for the Inmarsat-C Network.
The Transceiver only uses the mobile number when sending Message Position Reports
(see the
Message Handling Software Operators Guide
), to indicate which Transceiver
originated the position message.
3.4.1.1
Fast access to the Mobile Type
You can get an easy first time installation, as the Transceiver will automatically
recognize if the mobile number has never been entered before, and automatically bring
you to the
Change Mobile Type
menu.
In this situation the Mobile Number will display as
Mobile number : (unknown)
You can only change the Mobile Type the first time you enter the System Generation
and the status of the Mobile Type reads
(unknown).
If you see a Mobile Number here,
then you may skip this step as it has been performed by your dealer.
The procedure of changing the Transceiver to
Maritime
is shown below:
http://funk-an-bord.de
-- Page 35 of 42 --
Materialien zur LRC Prüfung
