T
Thrane & Thrane
T
TT-3020B C p a ra
Capsat Transceiver
I
t l
o
l
Installation Manual
P g
Page 2
5
30MAY95
2.
2.
ui
all io
Equipment installation
2.1
Introduction
This chapter provides specific information enabling you to install the Model TT-3020B
Capsat Transceiver into your own system, with minimal effort. The default, or factory
configuration is described, together with procedures for altering this configuration.
2.1.1
Initial inspection
R
N
WARNING
To avoid hazardous electrical shock, do not perform electrical
tests if there is any sign of shipping damage to any portion of
the front or rear panel or the outer cover. Read the safety
summary at the front of this manual before installing or
operating the TT-3020B Transceiver.
Inspect the shipping carton immediately upon receipt for evidence of mishandling
during the transit. If the shipping carton is severely damaged or waterstained request
that the carrier's agent be present when opening the carton. Save the carton packing
material for future use.
Contents of the shipment should be as listed in the packing list below. If the contents
are incomplete, if there is mechanical damage or defect, or if the TT-3020B Capsat
Transceiver does not work properly, notify your dealer.
After you unpack the TT-3020B Capsat Transceiver , inspect it thoroughly for hidden
damage and loose components or fittings.
²
Inspect the cable harness for stress, loose or broken wires, or broken cable tires.
²
Examine all the components for loose or missing hardware. Tighten all loose
hardware.
²
Remove loose debris from the cabinet interior.
http://funk-an-bord.de
-- Page 5 of 42 --
Materialien zur LRC Prüfung
