Thornhill Medical MOVES SLC, Operator'S Manual, Page: 291 / 362

Thornhill Research Inc. MOVES
®
SLC™ Operator’s Manual
277
Alarm / Message
Priority Locked /
Latching
Inhibitable
Causes Action(s)
112. IP1: High CVP Medium CVP measurement is greater
than or equal to the operator
set high CVP alarm limit. 1. Check for related alarms and
follow actions if required.
2. Clinical intervention may be
required.
113. IP1: Low ICP High ICP measurement is less than
or equal to the operator set
low ICP alarm limit. 1. Check for related alarms and
follow actions if required.
2. Clinical intervention may be
required.
114. IP1: High ICP Medium ICP measurement is greater
than or equal to the operator
set high ICP alarm limit. 1. Check for related alarms and
follow actions if required.
2. Clinical intervention may be
required.
115. IP2: Measurement
error Low IP measurement contains
values that are outside of the
measurement range of the
sensor. 1. Fully disconnect then reconnect IP
patient connection and zero IP
transducer as prompted.
2. Replace IP patient connection.
3. Check integrity of interface with
patient.
4. Power cycle MOVES
®
SLC™.
5. Return MOVES
®
SLC™ for
servicing.
116. IP2 disconnect Low Inhibitable
(Can be set
by
System
Administra-
tor.
to not be
inhibitable)
IP patient connection is
disconnected from system
after previously being
connected. 1. Fully disconnect then reconnect IP
patient connection.
2. Replace IP patient connection.
3. Power cycle MOVES
®
SLC™.
4. Return MOVES
®
SLC™ for
servicing.