THORLABS PTR306, User Manual

Page: 6 / 48

PTR306 / PTR306B Recoaters with Linear Proof Testers Chapter 2: Safety
Rev D, October 2, 2020 Page 3
WARNING
Turn off the power to the unit before servicing electrical components, such as fuses or bulbs.
WARNING
Always put on eye protection before turning the lamps on.
WARNING
Acetone is a flammable liquid. Do not dispense or use it near a source of heat.
WARNING
Read the MSDS of the chemical you plan on using to clean the recoat mold.
WARNING
Read the MSDS of the recoat material you plan on using.
WARNING
Make sure all of the bare glass is covered with recoat material in each recoat cycle.
Fuses can be replaced by twisting it to release, and then pulling it out of the housing; it is replaced by pushing the
fuse into the housing and then twisting it to lock in place. The fuse is 6.4 A, 250 V.
! !
! !
! !
! !
! !
! !