PTR306 / PTR306B Recoaters with Linear Proof Testers
Chapter 5: Setting up the Unit
Page 10
TTN090913-D02
5.
Plug this USB plug into the
top
USB socket
of the handset. Note that the USB socket on
the
side
of the handset is dedicated to
connecting a USB flash drive for
importing/exporting fiber files and updating
software. Leave it unpopulated for now.
6.
Plug the USB Type B plug of the wye cable
into its socket labeled “Data” on the back of
the unit.
7.
Plug the USB Type A plug into its socket
labeled “Power Out.”
Priming the Mold
Before dispensing recoat material, it is necessary to prime the recoat mold. This will make it easier to dispense the
exact right amount of acrylate material when recoating a fiber, and it will eliminate air bubbles that may be trapped
in the recoat material. Refer to Section 6.4 for instructions on priming the system.
Summary of Contents for PTR306
