THORLABS PTR306, User Manual

Page: 25 / 48

PTR306 / PTR306B Recoaters with Linear Proof Testers Chapter 7: VYT300C Handset Controller
Page 22 TTN090913-D02
Chapter 7 VYT300C Handset Controller
The PTR306/PTR306B Manual Inject Recoater is operated using the VYT300C Handset Controller.
7.1. Power Up
With the Handset Controller properly connected to the unit, turn on the
PTR306/PTR306B using the switch located at the back of the unit.
The system will go through an initialization process that takes a few seconds,
during which time it will home the right fiber holding block. During initialization
the Handset Controller will auto-detect the PTR306/PTR306B, and if all
parameters read from the system match the last known open file of the Handset,
then the handset will display that file name below the menu tabs. Otherwise, that
space is left blank.
The handset will display the Recoat & Test screen on startup. From here the
user can start curing a recoat or switch to another menu tab. Recoat and Proof
Test parameters can be viewed and changed in the Edit menu. Parameters can
be saved to a file, and those files can be managed in the File menu. The suite of
supplemental tools available for the PTR306/PTR306B can be found in the Tools
menu
Figure 17 Screen Capture of
PTR306 with file named “950-
200”
7.2. File
In addition to the Open File, Save File, and Save File As options described in section
5.11, the Handset also allows files to be Deleted, Exported, or Imported.
Deleting a file cannot be undone, so the handset will provide a prompt to confirm
deleting a file.
Exporting or Importing a file will require a memory device to be connected to the
Program Port of the VYT300C. Selecting Export file will show a list of files which
are currently saved to the handset. A copy of that file will be saved the connected
memory device in .xml format.
Importing a file will display all folders and all .xml extension files saved to the
memory stick attached. Importing the file will save it to the VYT300C.
Figure 18 PTR306B
File Menu