THORLABS LFE1220W-EU, Installation Manual

Page: 51 / 68

LFE1220W-US, -EU, and -UK Laminar Flow Enclosures Chapter 3: Installation
Rev A April 2021 Page 49
3.9. Fitting Curtains
3.9.1. Required Parts:
Code Description Qty
M Curtain Strip
70
Q Curtain Clamp – Short (with Part Number)
2
R Curtain Clamp – Short (with Logo) 2
S Curtain Clamp – Long
2
AB M6 Washer
82
AD Hammer Head Screw
74
AI M6 Domed Nut
74
Tools Required
AM 10 mm Spanner
3.9.2. Short Side Curtain Assembly
53. Insert the first Hammer Head Screw (AD) into one end of the middle slot of the Short Top Cross Member. Have the
long edge of the hammerhead parallel to the slot and insert, then rotate (clockwise) to prevent it from falling out.
The gap between the frame upright and the edge of Hammer Head Screw should be approx. 6.0 mm [0.25"] with
the slot at the end aligned vertically.
Figure 51 Inserting a Hammer Head Screw on the Short Side of the Frame