LFE1220W-US, -EU, and -UK Laminar Flow Enclosures
Chapter 3: Installation
Page 32
ETN056370-D02
34. It is recommended that 4 people perform this step.
Take the remaining set of uprights completed in step 29. Stand
them up on their castors, vertically, with the position screws facing the open ends of the roof frame.
Caution
Ensure that the rubber foot of the levelling castor is down (i.e. lower than the wheel). This is essential for the
following assembly step. The foot height can be adjusted using the adjustment wheel on the castor as shown
below. Do not adjust the foot further than 10 mm below the level of the castor.
Figure 32 Fitting the Roof Frame Assembly – Step 34
Summary of Contents for LFE1220W-EU
Page 68: ...www thorlabs com...
