THORLABS LFE1220W-EU, Installation Manual

Page: 10 / 68

LFE1220W-US, -EU, and -UK Laminar Flow Enclosures Chapter 3: Installation
Page 8 ETN056370-D02
3.4. Installing the Roof Frame Assembly
3.4.1. Required Parts:
Code Description Qty
A

Longitudinal Filter Support RH 2
B

Longitudinal Filter Support LH 2
C

Outer Lateral Filter Support 2
D

Long Top Cross Member 2
E

Central Lateral Filter Support 1
P Foam Tape 2
AA M6 Square Nut 16
AB M6 Washer 16
AC M6 x 1.0 Low Profile Screw, 16 mm Long 16
Tools Required
AF Assembly Block
AJ 4 mm T-handle hex driver
AK Assembly tool
3.4.2. Inner Frame Assembly
1. Take 1 x Longitudinal Filter Support RH (A

), 1 x Longitudinal Filter Support LH (B

) and 1 x Outer Lateral
Filter Support (C

). Lay the parts flat on the floor, with the filter flange uppermost as shown.
Figure 1 Identification of Longitudinal and Lateral Filter Supports