THORLABS LEDD3 Series, Operation Manual

Page: 39 / 62

37 Computer Interface
© 2009 Thorlabs
Description: Sets the current used for internal modulation.
4.3.2.12 Get Internal Modulation Current
Command: LEDD3_getModuCurrent
Parameter: None
Response: Internal modulation current in Ampere
Description: Returns the current used for internal modulation in ampere.
4.3.2.13 Set Internal Modulation Frequency
Command: LEDD3_setModuFreq
Parameter: Frequency in MHz
Response: None
Description: Sets the internal modulation frequency in MHz.
4.3.2.14 Get Internal Modulation Frequency
Command: LEDD3_getModuFreq
Parameter: None
Response: Frequency in MHz
Description: Returns the internal modulation frequency.
4.3.2.15
Set Internal Modulation Depth
Command: LEDD3_setModuDepth
Parameter: Modulation depth in percent
Response: None
Description: Sets the internal modulation depth in percent.
4.3.2.16 Get Internal Modulation Depth
Command: LEDD3_getModuDepth
Parameter: None
Response: Modulation depth in percent
Description: Returns the internal modulation depth in percent.
4.3.2.17 Set Constant Current
Command: LEDD3_setConstCurrent
Parameter: Constant current in Ampere
Response: None
Description: Sets the current in ampere used for the constant current mode.
4.3.2.18
Get Constant Current
Command: LEDD3_getConstCurrent
Parameter: None
Response: Constant current in ampere
Description: Returns the current in Ampere used for the constant current
mode.