THORLABS LEDD3 Series, Operation Manual

Page: 38 / 62

36 LEDD3 - FLIM LED Driver User Manual
© 2009 Thorlabs
4.3.2.4 Get Maximum Current Limit
Command: LEDD3_getMaxLimit
Parameter: None
Response: Maximum current limit in ampere
Description: Returns the current limit.
4.3.2.5 Set Maximum Frequency
Command: LEDD3_setMaxFrequency
Parameter: Maximum frequency in MHz
Response: None
Description: Sets the maximum frequency in MHz. This limit should only be
set in case a new LED was installed.
4.3.2.6 Get Maximum Frequency
Command: LEDD3_getMaxFrequency
Parameter: None
Response: Maximum frequency in MHz
Description: Returns the LEDs maximum frequency.
4.3.2.7 Set Operation Mode
Command: LEDD3_setOperationMode
Parameter: Operation Mode
Response: None
Description: Sets the operation mode.
4.3.2.8
Get Operation Mode
Command: LEDD3_getOperationMode
Parameter: None
Response: Actual operation mode
Description: Returns the operation mode.
4.3.2.9 Set LED OnOff
Command: LEDD3_setLedOnOff
Parameter: LED output state
Response: None
Description: Sets the LED output.
4.3.2.10 Get LED OnOff
Command: LEDD3_getLedOnOff
Parameter: None
Response: LED output state
Description: Returns the LED output state.
4.3.2.11
Set Internal Modulation Current
Command: LEDD3_setModuCurrent
Parameter: Internal modulation current in Ampere
Response: None