THORLABS LEDD3 Series, Operation Manual

Page: 56 / 62

54 LEDD3 - FLIM LED Driver User Manual
© 2009 Thorlabs
7
Listings
7.1
List of Acronyms
The following acronyms and abbreviations are used in this manual:
AC Alternating Current
AGND Analog Ground
DC Direct Current
DGND Digital Ground
DLL Dynamic Link Library
FCC
Federal Communications Commission
FLIM Fluorescence Lifetime Imaging
GUI Graphical User Interface
IEC International Electrotechnical Commission
LCD Liquid Crystal Display
LED Light Emitting Diode
PC Personal Computer
PCB Printed Circuit Board
USB Universal Serial Bus
7.2
List of Figures
Figure 1 Connecting the LED Head
Figure 2 Display and Operating Elements on the Front Panel
Figure 3 Operating Elements on the Rear Panel
Figure 3a Operating Elements on the LED Head
Figure 4 Welcome Screen
Figure 5 Main Menu
Figure 6 Constant Current Mode
Figure 7 Internal Modulation Mode
Figure 6 Internal Modulation - Current Adjustment
Figure 9 Internal Modulation - Frequency Adjustment
Figure 10 Internal Modulation - Modulation Depth Adjustment
Figure 11 Definition of the Parameter Current and Modulation Depth
Figure 12 External Control Mode
Figure 13 Main Menu
Figure 14 LED Current Limit Setting
Figure 15a LED Maximum Current
Figure 15b LED Maximum Frequency
Figure 16 LCD Backlight Brightness Setting
Figure 17 About Panel
Figure 18 Autorun Menu
Figure 19 VISA Installation Start Screen
Figure 20 Selection of the Installation Path
Figure 21 License Agreement
Figure 22 Selection of VISA Features
Figure 23 Finalize Installation
Figure 24 Request for Administrator Privileges
Figure 25 Selecting the Installation Paths
Figure 26 The Device Driver Installer
Figure 27 The Windows Logo Test