THORLABS LEDD3 Series, Operation Manual

Page: 37 / 62

35 Computer Interface
© 2009 Thorlabs
4.3
Command Reference
4.3.1
Command List
Command Description
LEDD3_setLimitCurrent Set User Current Limit
LEDD3_getLimitCurrent Get User Current Limit
LEDD3_setMaxLimit Set Maximum Current Limit
LEDD3_getMaxLimit Get Maximum Current Limit
LEDD3_setMaxFrequency Set Maximum Frequency
LEDD3_getMaxFrequency Get Maximum Frequency
LEDD3_setOperationMode Set Operation Mode
LEDD3_getOperationMode Get Operation Mode
LEDD3_setLedOnOff Set LED OnOff
LEDD3_getLedOnOff Get LED OnOff
LEDD3_setModuCurrent Set Internal Modulation Current
LEDD3_getModuCurrent Get Internal Modulation Current
LEDD3_setModuFreq Set Internal Modulation Frequency
LEDD3_getModuFreq Get Internal Modulation Frequency
LEDD3_setModuDepth Set Internal Modulation Depth
LEDD3_getModuDepth Get Internal Modulation Depth
LEDD3_setConstCurrent Set Constant Current
LEDD3_getConstCurrent Get Constant Current
LEDD3_setDispBright Set Display Brightness
LEDD3_getDispBright Get Display Brightness
LEDD3_getStatusRegister Get Status Register
LEDD3_errorMessage Error Message
LEDD3_identificationQuery Identification Query
LEDD3_revisionQuery Revision Query
4.3.2
Description
4.3.2.1 Set User Limit Current
Command: LEDD3_setLimitCurrent
Parameter: Current limit in Ampere
Response: None
Description: Sets the current limit. This limit may not exceed the LEDs limit
specified in the LED head.
4.3.2.2 Get User Limit Current
Command: LEDD3_getLimitCurrent
Parameter: None
Response: Current limit in Ampere
Description: Returns the current limit.
4.3.2.3 Set Maximum Current Limit
Command: LEDD3_setMaxLimit
Parameter: Maximum current limit in ampere
Response: None
Description: Sets the LEDs maximum current limit in ampere. This limit
should only be set in case a new LED was installed.