9
K-Cube Solenoid Controller
Chapter 3 Getting Started
3.1 Install The Software
DO NOT CONNECT THE CONTROLLER TO YOUR PC YET
1) Go to Services/Downloads at www.thorlabs.com and download the software.
2) Run the .exe file and follow the on-screen instructions.
3) Follow the on-screen instructions.
3.2 Mechanical Installation
3.2.1 Environmental Conditions
Location
Indoor use only
Maximum altitude
2000 m
Temperature range
5
o
C to 40
o
C
Maximum Humidity
Less than 80% RH (non-condensing) at 31°C
To ensure reliable operation the unit should not be exposed to corrosive agents or
excessive moisture, heat or dust.
If the unit has been stored at a low temperature or in an environment of high humidity,
it must be allowed to reach ambient conditions before being powered up.
Note
When operating via a PC, direct user interaction with the solenoid
controller is accomplished through intuitive graphical user interface
panels (GUIs), which expose all key operating parameters and modes.
The multitasking software architecture ensures that the graphical control
panels always remain live, showing all current hardware activity.
Caution
Some PCs may have been configured to restrict the users ability to load
software, and on these systems the software may not install/run. If you are
in any doubt about your rights to install/run software, please consult your
system administrator before attempting to install.
If you experience any problems when installing software, contact Thorlabs on
+44 (0)1353 654440 and ask for Technical Support.
Warning
Operation outside the following environmental limits may adversely affect
operator safety.
