26
HA0368T Rev C May 2019
Chapter 5
Section 6.2. For further details on the parameter values shown in the ‘Settings’
display - see Section 6.3.
The Kinesis software will be used throughout the rest of this tutorial to interface with
the Solenoid Controller K-Cube.
5.2.1 Setting Manual Mode
1) Press the Manual Mode button
2) Press the Open button. The SH05 shutter opens and the Open LED is lit.
3) Press the OFF button. The SH05 shutter closes and the Open LED is
extinguished.
5.2.2 Setting Auto Mode
1) Press the Auto Mode button.
2) Press the Start button. The SH05 shutter begins to open and close. The Active
LED is lit and the Open LED is lit while the shutter is open.
Unless the default settings have been changed, the following settings apply:
Manual
Close
Open
Auto
Stop
Start
