4
HA0368T Rev C May 2019
Chapter 2
Chapter 2 Overview and Setup
2.1 Introduction
The K-Cube Solenoid Controller (KSC101) is a new very compact single channel
controller for easy manual and automated control of solenoid operated shutters, and
other such devices. Designed to operate 15V solenoid actuated devices, this mini
controller is fully featured, possessing an embedded DSP processor to provide a
multitude of flexible operating modes.
Embedded software functionality allow this unit to be used to control solenoid devices
manually (using panel buttons), automatically with DSP timed operation, or via
external trigger signals for operation with third party equipment. A trigger out
connection allows multiple K-Cube controllers to be connected together for multi-
channel ‘synchronised’ operation.
For convenience the footprint of this unit has been kept to a minimum, measuring only
60mm x 60mm x 47mm (2.4" x 2.4" x 1.8") and with the facility to directly mount to the
optical table. The manual controls for this unit are conveniently located on the upper
surface such as the ‘Mode’ and ‘Enable’ buttons. The Mode button allows the various
operating modes to be selected easily and the Enable button is used to initiate manual
or automatic operation of the solenoid controller output. There is also a safety key
switch and interlock plug fitted to this compact unit for use in laser safety applications .
Fig. 2.1 K-Cube Solenoid Controller
