THORLABS 4000 Series Programmer'S Reference Manual Download Page 77

Page: 77 / 97

3 Commands by Subsystem

3.16 Display Subsystem Commands

The

DISPlay

subsystem controls the front panel display (LCD) of a Thorlabs Series 4000

instrument.
Table <%+%>: Display Commands

Command

Description

DISPlay

Path to display subsystem

:BRIGHTness

<value>

Set the display brightness

:BRIGHTness?

Return the display brightness

:CONTrast

<value>

Set the display contrast

:CONTrast?

Return the display contrast

3.16.1 Display Brightness

Syntax

DISPlay:BRIGHTness <value>

DISPlay:BRIGHTness?

Description

The

DISPlay:BRIGHTness

command controls the intensity of the display. The range of the

parameter is 0 to 1, where 1 is full intensity and 0 is fully blanked.

Example

DISP:BRIGHT 0.6

Sets the brightness of the front panel display to 60% of full intensity

3.16.2 Display Contrast

Syntax

DISPlay:CONTrast <value>

DISPlay:CONTrast?

Description

The

DISPlay:CONTrast

command determines the relative difference in brightness between

“full” intensity and “no” intensity as displayed. The parameter ranges in value from 0 to 1; 0

indicates no difference between data and background, and 1 indicates maximum contrast.

Example

DISP:CONT 0.5

Sets the contrast of the front panel display to 50%.

Summary of Contents for 4000 Series

































































































Search results

Summary of Contents for 4000 Series

Reviews:

THORLABS 4000 Series, Programmer'S Reference Manual, Page: 77 / 97

Search results

Summary of Contents for 4000 Series

Reviews: