Calibration of the scanner
Scanner
operation
Once the positioning is correct, the scanner will prompt you to
Freeze and
the red indicator circles will turn green. Do not move the scanner while this
is happening. It will take 2-3 seconds to finish. Once finished, the screen will
prompt for second position.
Move the scanner slowly away from the board and watch the distance
indicator for guidance as to how far to move. Once the software finishes
calibration in second position, it will prompt for the third, the fourth, etc.
There are 7 positions in total.
Once the scanner has been calibrated at all 7 positions, the software will
restart automatically and the device is ready for use.
70
Drake. User manual
70
Summary of Contents for Calibry
