21
Troubleshooting (Continued)
OVEN PILOT DOES NOT WORK
Press and hold the button on the oven safety
valve and put flame to the pilot.
If the pilot doesn’t burn remove the oven
bottom.
Loosen pilot but out of the burner bracket.
Remove pilot tube from the safety valve.
Remove the pilot orifice from the pilot or
end of the tube and check for debris.
Re-install the pilot orifice and tubing.
Continued to hold the button for 30 seconds.
The pilot should light and remain lit after the
button is released.
If the pilot doesn’t remain lit, wait 5 minutes
and retry.
If the pilot doesn’t remain lit remove the
thermocouple from the safety valve.
Install a thermocouple adapter between the
safety valve and thermocouple to measure the
DC MV.
Install a DVM on the adaptor.
Holding the button, light the pilot.
If the voltage doesn’t rise above 10 MV adjust
the pilot valve and retest.
If the MV doesn’t rise quickly above 10 replace
the thermocouple.
If the thermocouple works properly replace the
safety valve.
Does the pilot burn?
Light the pilot.
Summary of Contents for TR-0-G24F
Page 26: ...Explosion drawing 25...
Page 31: ......
