27
3.
Replace the Main Burner Injector (Griddle) – only for GL174 models
a.
Lift up the griddle plate and remove it. Then, remove the burner.
b.
Remove the two screws of the U-burner injector fix plate.
c.
Disconnect the main pipe assembly from the safety gas valve. Then, take out the main
pipe assembly and remove the main burner injector and replace with the appropriate
main burner injector for the gas type that the unit will operate on. Refer to the Gas
Specification Table on page 5 of this manual for the corresponding main burner injector
size for each specific gas type. Use 13mm spanner to remove and install the main burner
injector.
Main Burner Injector
