THOMSON TSC 80, Service Manual, Page: 5 / 41

TSC 80 TRANSFER SWITCH CONTROLLER
PM063 Rev 7 09/02/27 Thomson Technology
1
1. INTRODUCTION
1.1. PRODUCT REVISION HISTORY
The following information provides an historical summary of changes made to this product
since the original release.
Software Version
1.0 04/11/19
Original version
1.1 05/05/10 Software updated to incorporate the following:
Revise potentiometer control directions to match revised
printed circuit board silkscreen text.
Change operation associated to “secure” configuration
jumper. Enable remote load test to be activated if secure
jumper is ON.
1.2
05/10/31 Beta Test Software-Not released for production
1.3 05/11/05
Software updated to change some internal default timer settings
2.0
08/08/14 Software updated to incorporate TSC 80e Option
2.1 09/01/01
Software updated to incorporate Configurable PT Ratio for TSC
80e Option
2.2 09/02/27
Software revised to correct 7-Day Genset Exercise Operation in
TSC 80 Controllers utilizing version 2.0 and 2.1software.
Operating & Service Manual Version
C
o
n
t
a
c
t
Thomson Technology, to obtain applicable instruction manuals. Soft copy of most current
version is available at www.thomsontechnology.com.
Rev 0 04/11/19
Original release
Rev 1 05/05/10 The following changes have been incorporated:
Add changes for revised TSC 80 Software version 1.1.
Add new Environmental Section
Miscellaneous changes
Rev 2 05/12/15 Add changes for revised TSC 80 Software version 1.3.
Rev 3 08/08/01
Add changes for TC80e Option
Rev 4 08/08/18 Revised Default Settings for TSC 80E
Rev 5 09/01/01
Manual changed to dedicated TSC 80 manual (removed TSC 80E
references)